Husqvarna Fc350 2016

Pulse IPT P.4 210 Cranking AMPS Replaces YTX4L-BS, YTZ5S

Fork Dust Seals WP/48mm/MX/Genuine WP pair

K-Tech Suspensions Factory approved fork Fluid for all K-Tech  Fork Products -Motul Factory Line 5 wt  1 liter

Specially formulated for SHOWA, KAYABA, OHLINS, WP forks, and any type of upside/down or
conventional telescopic fork.
Reduced internal friction, specially fork tubes and seals thanks to the exclusive anti-friction additive designed and developed by MOTUL.
Outstanding suspension performance 
High performance anti-foam avoiding air transfer to the air chamber to maintain suspension
performance.
Anti-wear and extreme pressure properties. Anti-corrosion. Seals protection.
Properties:
Density at 20C  ASTM D1298  0.834 
Viscosity at 40C  ASTM D445  18.0 mm/s 
Viscosity at 100C  ASTM D445  4.0 mm/s
Viscosity Index  ASTM D2270  121 
Flash point  ASTM D92  208C
Pour point  ASTM D97  <-39C 

48mmx12mmx2.0mm/Genuine WP

48mmx58mmx9.5mm/MX USD/Pair/Genuine NOK/Pair

Fits 48mm Front Forks/48.70mmx20mmx1.0mm/Pair

48mm ID Universal Low Friction Requires Fork Disassembly For Installation SOLD EACH

KX450F 07-14, YZF450 10-15, WP 4CS, 4.0N-5.2N 2007-2014

SPACER-FF-430*  43mm Spacer available in (43x35x2mm) -Black / (43x35x3mm)-Red / (43x35x5mm)-Grey

INCLUDES TOP CAP SPANNER & COMP VALVE TOOL WP 4860 KTM SX 2007>

113-010-035  Fork Top Cap Spanner Wrench 4 Pin WP  4860/4CS/ Ohlins R&T
4 x 3.5mm pins on 38mm centers with 31mm center bore

HPFS High Performance Front Fork Oil  SAE 5w, 1 liter ,  17.5cst at 40C

RCU Piston Bush WP 50x13.00x1.25  

211-205-064 WP 64mm Reservoir Schrader Filler Adapter
Greatly simplifies WP rear shock reservoir filling
Schrader type filler adapter eliminates need for special WP tooling

211-205-005 WP Shocks Needle Gassing valve filler M5x0.8P

RCU Reservoir/Bladder Conversion WP 60mm Applications

211-505-050 KYB/SHOWA/WP 50MM - lowers seat height approximately 30MM

The K-Tech ORVS for WP Shock Absorbers uses a higher flowing four port piston to eliminate harshness. The piston is supplied with a shim stack for a wide range of rider abilities backed up with a setting bank allowing it to be tuned for different abilities and terrains. A low friction piston band is supplied to lower the friction in the shock absorber enhancing damping stability over demanding racing conditions

It is recommended that this product is fitted by a professional suspension company as there are specialist tools and skills required to guarantee safety and performance from the product

260LG WP White RAL 9016, 36N-66N 2011-2017