Ktm Rc390 2015

KTM RC390 2014-2016/RC390 2017/Duke 390 2016-2017 Fits Over Standard Clutch Cover ONLY Precision Injection Molded 60% Long Glass Fiber Reinforced Nylon Composite Highly Impact/Abrasion Resistant

KTM� RC390 2014-2016 Fits Over Standard Engine Covers ONLY Stator/Alternator Cover/Clutch Cover 2 Piece Set Precision Injection Molded 60% Long Glass Fiber Reinforced Nylon Composite Highly Impact/Abrasion Resistant

KTM� RC390 2014-2016 Fits Over Standard Stator/Alternator/Generator Cover ONLY Precision Injection Molded 60% Long Glass Fiber Reinforced Nylon Composite Highly Impact/Abrasion Resistant

DSS-011 WP 43MM -**NOT NOK** Pair  43x53.4x11.8/5.8 mm

K-Tech Suspensions Factory approved fork Fluid for all K-Tech  Fork Products -Motul Factory Line 5 wt  1 liter

Specially formulated for SHOWA, KAYABA, OHLINS, WP forks, and any type of upside/down or
conventional telescopic fork.
Reduced internal friction, specially fork tubes and seals thanks to the exclusive anti-friction additive designed and developed by MOTUL.
Outstanding suspension performance 
High performance anti-foam avoiding air transfer to the air chamber to maintain suspension
performance.
Anti-wear and extreme pressure properties. Anti-corrosion. Seals protection.
Properties:
Density at 20C  ASTM D1298  0.834 
Viscosity at 40C  ASTM D445  18.0 mm/s 
Viscosity at 100C  ASTM D445  4.0 mm/s
Viscosity Index  ASTM D2270  121 
Flash point  ASTM D92  208C
Pour point  ASTM D97  <-39C 

FF GUIDE BUSH** PAIR 43x12x2.00

43mmx53mmx9.5mm/MX USD/Genuine NOK /Pair

Fits 44mm Front Forks/43.70mmx20mmx1.0mm/Pair

43mm ID Universal Low Friction Requires Fork Disassembly For Installation SOLD EACH

113-200-000 Fork Tube Clamping tool. Require tube adapters available from 24mm - 50mm

113-200-043 43mm Fork Tube Clamp Adapter . Use with Clamp tool # 113-200-000

113-010-020  Fork Top Cap Spanner Wrench with 17mm forked end for 20DDS/25SSK/KTR-3 /20IDS

113-010-035  Fork Top Cap Spanner Wrench 4 Pin WP  4860/4CS/ Ohlins R&T
4 x 3.5mm pins on 38mm centers with 31mm center bore

20IDS / Tracker Cartridge Assembly + Removal Tool 

  FF DEALER TOOL KIT 20IDS / TRACKER

HPFS High Performance Front Fork Oil  SAE 5w, 1 liter ,  17.5cst at 40C

KTM 390 2014-2017 Razor-R Rear Shock 35mm Piston + 14mm Shaft Adjustable For: Compression Damping Rebound Damping Spring Preload Ride Height Hose Mounted Remote Reservoir Nitrogen Gas Charged Fully Rebuildable

#46-150 Fits  Razor R / Razor Lite 75N-215N  46MM X 150MM - Not for OEM shocks

213-100-235 RCU DEALER SERVICE TOOL KIT RAZOR 

213-235-305 RAZOR SHOCK SPRING COLLAR ADJUSTER TOOL