F3+ Brutale 675-800 12-14,F4 up to 13, Brutale 05-14 Rear Dymag Aluminum UP7X Wheel 17"

F3 + Brutale -12 Front Dymag Aluminum UP7X Wheel 17"

MV Agusta F3 675/800 2012-2016/Fits Standard Clutch Cover ONLY/Injection Molded Long Fiber Reinforced Nylon/High Impact/Low Wear

MV Agusta F3 675/800 2012-2016/Fits Standard Covers ONLY/Injection Molded Long Fiber Reinforced Nylon/High Impact/Low Wear

MV Agusta F3 675/800 2012-2016/Fits Standard Alternator/Stator/Generator Cover ONLY/Injection Molded Long Fiber Reinforced Nylon/High Impact/Low Wear

Showa Fork Dust Seals/43mm/Genuine Showa

K-Tech Suspensions Factory approved fork Fluid for all K-Tech  Fork Products -Motul Factory Line 5 wt  1 liter

Specially formulated for SHOWA, KAYABA, OHLINS, WP forks, and any type of upside/down or
conventional telescopic fork.
Reduced internal friction, specially fork tubes and seals thanks to the exclusive anti-friction additive designed and developed by MOTUL.
Outstanding suspension performance 
High performance anti-foam avoiding air transfer to the air chamber to maintain suspension
performance.
Anti-wear and extreme pressure properties. Anti-corrosion. Seals protection.
Properties:
Density at 20C  ASTM D1298  0.834 
Viscosity at 40C  ASTM D445  18.0 mm/s 
Viscosity at 100C  ASTM D445  4.0 mm/s
Viscosity Index  ASTM D2270  121 
Flash point  ASTM D92  208C
Pour point  ASTM D97  <-39C 

FSS-012 FF OIL SEALS PAIR SHOWA 43x54x9.5/10.5  GENUINE NOK

43mm ID Universal Low Friction Requires Fork Disassembly For Installation SOLD EACH

Front Fork Spring - 8.0N - 12.0N  - For use with K-Tech 25RDS/IDS, DDS cartridges / Ohlins R&T & SBK Forks / Ohlins fitted OEM models of Aprilia/Ducati/Honda/Triumph/Yamaha / Kawasaki ZX6R 07-08, ZX6R 636 13-19,R6 03-04 

Front Fork Spring 9.5N 10.5N Suzuki GSXR 1000 2001-2006/Honda CBR 1000RR 2004-2011/Kawasaki ZX 10R 1000 Ninja 2006-2007/ YZF R1 2004-2008  / MV F3 675/800 2012-2018

SPACER-FF-380*   38x27 (2mm , 3mm or 5mm) 

113-010-020  Fork Top Cap Spanner Wrench with 17mm forked end for 20DDS/25SSK/KTR-3 /20IDS

13-100-500  Cartridge Holder Tool For K-Tech DDS/25RDS/25IDS  Applications

#113-030-050 PISTON ROD PULL UP TOOL M10/12 X 1.0P & M10/12 X 1.25P