Husqvarna Fe501 2021

Fork Dust Seals WP/48mm/MX/Genuine WP pair

K-Tech Suspensions Factory approved fork Fluid for all K-Tech  Fork Products -Motul Factory Line 5 wt  1 liter

Specially formulated for SHOWA, KAYABA, OHLINS, WP forks, and any type of upside/down or
conventional telescopic fork.
Reduced internal friction, specially fork tubes and seals thanks to the exclusive anti-friction additive designed and developed by MOTUL.
Outstanding suspension performance 
High performance anti-foam avoiding air transfer to the air chamber to maintain suspension
performance.
Anti-wear and extreme pressure properties. Anti-corrosion. Seals protection.
Properties:
Density at 20C  ASTM D1298  0.834 
Viscosity at 40C  ASTM D445  18.0 mm/s 
Viscosity at 100C  ASTM D445  4.0 mm/s
Viscosity Index  ASTM D2270  121 
Flash point  ASTM D92  208C
Pour point  ASTM D97  <-39C 

48mmx12mmx2.0mm/Genuine WP

111-330-040 WP Front Fork Lowering kit XPLOR with 23mm cartridge  less 30mm over all length
Replaces original fork fork spring seat and inner collar providing 30 mm lower than standard height.
Maintains clearance between wheel and under fender
Retains use of original spring dimensions / shorter spring not required!

 

48mmx58mmx9.5mm/MX USD/Pair/Genuine NOK/Pair

Fits 48mm Front Forks/48.70mmx20mmx1.0mm/Pair

48mm ID Universal Low Friction Requires Fork Disassembly For Installation SOLD EACH

KX450F 07-14, YZF450 10-15, WP 4CS, 4.0N-5.2N 2007-2014

SPACER-FF-430*  43mm Spacer available in (43x35x2mm) -Black / (43x35x3mm)-Red / (43x35x5mm)-Grey

113-010-032  Front Fork Top Cap Spanner WP 50mm

HPFS High Performance Front Fork Oil  SAE 5w, 1 liter ,  17.5cst at 40C

117-600-023-002 FF PISTON KIT WP XPLOR FORKS 2019>

RCU Piston Bush WP 50x13.00x1.25  

211-205-064 WP 64mm Reservoir Schrader Filler Adapter
Greatly simplifies WP rear shock reservoir filling
Schrader type filler adapter eliminates need for special WP tooling

211-205-005 WP Shocks Needle Gassing valve filler M5x0.8P

RCU Reservoir/Bladder Conversion WP 60mm Applications

211-505-050 KYB/SHOWA/WP 50MM - lowers seat height approximately 30MM

The K-Tech ORVS for WP Shock Absorbers uses a higher flowing four port piston to eliminate harshness. The piston is supplied with a shim stack for a wide range of rider abilities backed up with a setting bank allowing it to be tuned for different abilities and terrains. A low friction piston band is supplied to lower the friction in the shock absorber enhancing damping stability over demanding racing conditions

It is recommended that this product is fitted by a professional suspension company as there are specialist tools and skills required to guarantee safety and performance from the product

217-600-050-011  50.00x12.00mm WP 50MM X-COUNTRY