Husqvarna Fx450 2020

Fork Dust Seals WP/48mm/MX/Genuine WP pair

K-Tech Suspensions Factory approved fork Fluid for all K-Tech  Fork Products -Motul Factory Line 5 wt  1 liter

Specially formulated for SHOWA, KAYABA, OHLINS, WP forks, and any type of upside/down or
conventional telescopic fork.
Reduced internal friction, specially fork tubes and seals thanks to the exclusive anti-friction additive designed and developed by MOTUL.
Outstanding suspension performance 
High performance anti-foam avoiding air transfer to the air chamber to maintain suspension
performance.
Anti-wear and extreme pressure properties. Anti-corrosion. Seals protection.
Properties:
Density at 20C  ASTM D1298  0.834 
Viscosity at 40C  ASTM D445  18.0 mm/s 
Viscosity at 100C  ASTM D445  4.0 mm/s
Viscosity Index  ASTM D2270  121 
Flash point  ASTM D92  208C
Pour point  ASTM D97  <-39C 

48mmx12mmx2.0mm/Genuine WP

48mmx58mmx9.5mm/MX USD/Pair/Genuine NOK/Pair

Fits 48mm Front Forks/48.70mmx20mmx1.0mm/Pair

48mm ID Universal Low Friction Requires Fork Disassembly For Installation SOLD EACH

For use with K-Tech ORSS WP AER Cartridges + Showa SFF 48mm KX250F 13-19/RMZ250F 13-15/RMZ450F   13  Precision Wound Shot Peened + Hardened Choose Rate Below SOLD EACH

SPACER-FF-430*  43mm Spacer available in (43x35x2mm) -Black / (43x35x3mm)-Red / (43x35x5mm)-Grey

113-030-105 FF PISTON ROD PLATE 10.70/12.70 PLASTIC

113-010-107  FF Compression Valve Tool KYB/SHOWA SFF/SAFF 36mm 
Can also be used with K-Tech's ORVS AER 48 kit # 117-600-034-001

113-010-032  Front Fork Top Cap Spanner WP 50mm

113-075-037 Front Fork Cartridge Tube Clamp 37mm (Two Piece)

HPFS High Performance Front Fork Oil  SAE 5w, 1 liter ,  17.5cst at 40C

122-020-155-001 WP AER48 ORSS2 with Anti-Bottom / purchase spring separately

117-600-034-001 WP AER48 KTM / Husqvarna MX / 4 Stroke Spec

117-600-034-002  WP 4860 MXMA AER 48mm XCOUNTRY/ENDURO SPECS

117-600-034-003  WP 4860 MXMA AER 48mm MX/ 2 Stroke Specs

RCU Piston Bush WP 50x13.00x1.25  

211-205-064 WP 64mm Reservoir Schrader Filler Adapter
Greatly simplifies WP rear shock reservoir filling
Schrader type filler adapter eliminates need for special WP tooling

211-205-005 WP Shocks Needle Gassing valve filler M5x0.8P