Kawasaki Ex300 2013

EX300-302 EX300 Ninja 300 13-17 / Sold each , requires 2 per set

Pulse IPT P.10 210 Cranking AMPS Replaces YT12A-BS, YTX9-BS, YTZ12S, YTZ14S

205-200-279  Razor R / Razor R Lite Shock Service Kit / Tools Required / Service Center Installation Recommended

Showa Fork Dust Seals/37mm/MX/Genuine Showa

K-Tech Suspensions Factory approved fork Fluid for all K-Tech  Fork Products -Motul Factory Line 5 wt  1 liter

Specially formulated for SHOWA, KAYABA, OHLINS, WP forks, and any type of upside/down or
conventional telescopic fork.
Reduced internal friction, specially fork tubes and seals thanks to the exclusive anti-friction additive designed and developed by MOTUL.
Outstanding suspension performance 
High performance anti-foam avoiding air transfer to the air chamber to maintain suspension
performance.
Anti-wear and extreme pressure properties. Anti-corrosion. Seals protection.
Properties:
Density at 20C  ASTM D1298  0.834 
Viscosity at 40C  ASTM D445  18.0 mm/s 
Viscosity at 100C  ASTM D445  4.0 mm/s
Viscosity Index  ASTM D2270  121 
Flash point  ASTM D92  208C
Pour point  ASTM D97  <-39C 

37mmx12mmx2.0mm/Genuine Showa

Honda CR 85 1996>/CRF 150 2007>/Suzuki RM 85 2002>/37x50x11mm Showa/NOK

Fits 37mm Front Forks/37.70mmx20mmx1.0mm

For use on 20IDS cartridges installed on Kawasaki EX250/300 and Harley Davidson 39mm fork applications
Not for use on standard internal forks

113-010-020  Fork Top Cap Spanner Wrench with 17mm forked end for 20DDS/25SSK/KTR-3 /20IDS

20IDS / Tracker Cartridge Assembly + Removal Tool 

#113-125-010 Top Cap Spanner 20IDS EX250/EX300

#113-030-050 PISTON ROD PULL UP TOOL M10/12 X 1.0P & M10/12 X 1.25P

  FF DEALER TOOL KIT 20IDS / TRACKER

HPFS High Performance Front Fork Oil  SAE 5w, 1 liter ,  17.5cst at 40C

Kawasaki EX 300 Ninja 2013-2017 Razor-R Rear Shock 35mm Piston + 14mm Shaft Adjustable For: Compression Damping Rebound Damping Spring Preload Ride Height Hose Mounted Remote Reservoir Nitrogen Gas Charged Fully Rebuildable