Your shopping cart is currently empty.
Ktm 1290 Superduke R 2015
Eazi-Grip Evo Tank Grips
MSRP: $49.95 (USD)EVO507BLExact FitKTM 1290 Superduke R 2014-2016/Evo Tank Grips/Polyurethane/Improves Body Stability/Control/Black
GB Racing Clutch Cover
MSRP: $141.84 (USD)EC-1290-2014-2-GBRExact FitKTM 1290 Superduke 2014-2017 Fits Standard Cover ONLY Precision Injection Molded 60% Long Glass Fiber Reinforced Nylon High Impact/Low Wear
GB Racing Secondary Engine Cover Set
MSRP: $289.15 (USD)EC-1290-2014-SET-GBRExact FitKTM 1290 Super Duke 2014-2017 Precision Injection Molded 60% Long Glass Fiber Reinforced Nylon Highly Impact/Abrasion Resistant Low Wear Clutch/Stator Cover
GB Racing Stator Cover
MSRP: $162.53 (USD)EC-RC8-2011-1-GBRKTM RC8-R 2011-2016 1290 Superduke 2014-2016 Secondary Stator/Alternator/Generator Cover Precision Injection Molded 60% Long Glass Fiber Nylon Highly Impact Fracture Resistant
K-Tech Suspension Fork Dust Seals WP pair
MSRP: $35.44 (USD)DSS-035Exact FitFork Dust Seals WP/48mm/MX/Genuine WP pair
K-tech Suspension Fork Fluid
MSRP: $24.21 (USD)MOTUL-5-FACT-1K-Tech Suspensions Factory approved fork Fluid for all K-Tech Fork Products -Motul Factory Line 5 wt 1 liter
Specially formulated for SHOWA, KAYABA, OHLINS, WP forks, and any type of upside/down or
conventional telescopic fork.
Reduced internal friction, specially fork tubes and seals thanks to the exclusive anti-friction additive designed and developed by MOTUL.
Outstanding suspension performance
High performance anti-foam avoiding air transfer to the air chamber to maintain suspension
performance.
Anti-wear and extreme pressure properties. Anti-corrosion. Seals protection.
Properties:
Density at 20C ASTM D1298 0.834
Viscosity at 40C ASTM D445 18.0 mm/s
Viscosity at 100C ASTM D445 4.0 mm/s
Viscosity Index ASTM D2270 121
Flash point ASTM D92 208C
Pour point ASTM D97 <-39C
K-Tech Suspension Fork Guide Bushing WP pair
MSRP: $23.76 (USD)GBS-035Exact Fit48mmx12mmx2.0mm/Genuine WP
K-Tech Suspension Fork Oil Seals WP pair
MSRP: $31.70 (USD)FSS-035Exact Fit48mmx58mmx9.5mm/MX USD/Pair/Genuine NOK/Pair
K-Tech Suspension Fork Slide Bushings WP pair
MSRP: $24.46 (USD)SBS-035Exact FitFits 48mm Front Forks/48.70mmx20mmx1.0mm/Pair
K-Tech Suspension Fork Travel Indicator
MSRP: $26.11 (USD)25K-028FExact Fit48mm ID Universal Low Friction Requires Fork Disassembly For Installation SOLD EACH
K-Tech Suspension Front Fork Air Bleed Screw
MSRP: $11.53 (USD)111-030-030OExact Fit111-030-030O (WP) ORANGE - PAIR
K-Tech Suspension Front Fork Spring
MSRP: $141.12 (USD)38-255Exact FitSuzuki GSXR1000R 2017-2018 Kawasaki ZX10R Ninja 2016-2018 38mm ODx255mm Length Choose Rate Below
K-Tech Suspension Front Fork Spring Spacer
MSRP: $10.01 (USD)SPACER-FF-430Exact FitSPACER-FF-430* 43mm Spacer available in (43x35x2mm) -Black / (43x35x3mm)-Red / (43x35x5mm)-Grey
K-Tech Suspension Front Fork Tools
MSRP: $30.50 (USD)113-010-020Exact Fit113-010-020 Fork Top Cap Spanner Wrench with 17mm forked end for 20DDS/25SSK/KTR-3 /20IDS
K-Tech Suspension Front Fork Tools
MSRP: $31.45 (USD)113-010-035113-010-035 Fork Top Cap Spanner Wrench 4 Pin WP 4860/4CS/ Ohlins R&T
4 x 3.5mm pins on 38mm centers with 31mm center bore
K-Tech Suspension Front Fork Tools
MSRP: $31.45 (USD)113-030-050#113-030-050 PISTON ROD PULL UP TOOL M10/12 X 1.0P & M10/12 X 1.25P
K-Tech Suspension HPSF FF Suspension Fluid
MSRP: $27.15 (USD)110-017-001Exact FitHPFS High Performance Front Fork Oil SAE 5w, 1 liter , 17.5cst at 40C
K-Tech Suspension RCU Seal Head Service Kit
MSRP: $38.63 (USD)205-200-090
K-Tech Suspension Reservoir Bladder Conversion
MSRP: $136.27 (USD)211-900-115211-900-115 RCU RESERVOIR/BLADDER CONVERSION WP 54mm APPLICATIONS
K-Tech Suspension Seal Head Lowering Spacer
MSRP: $57.64 (USD)211-505-046211-505-046 Showa / KYB / WP RCU Lowering Spacer - Lowers seat approximately 30mm